- Model NO.: LTSPT-008
- Shape: Vertical Type
- Material: Steel Pipe Tower
- Certification: ISO
- Height: 40m
- Alpplication: Transmission Line Tower
- Trademark: LT
- Origin: Qingdao Shandong China
- Structure: Three-Column Steel Pipe Tower
- Standard: Standard
- Belly Bar Shape: Cross Type
- Condition: New
- Surface Treatment: Hot DIP Galvanized
- Zinc Coating: ≥86um
- Specification: ISO
- HS Code: 73089000
Section 1
Production Informations:
Raw Marerial :(GB)Q235B Â Â ASTM A36 Â Â Â (JIS)SS400B Â Â Â Â Â (EN) S235JR
(GB)Q345B Â Â ASTM A 572 Â SM409B Â Â (EN)S335JR
Voltage Grade:220KV
Height:35M
Surface Treatment:Hot Dip Galvanized.
Zince Coating Thickness:≥86microns(μm).
Â
Â
Â
Section 2
Lutai is an expert  manufacturer  for all types of steel towers.We have a independent Design Center.
Â
Design and Manufacture scope:
1) Material:All types,GB/ASTM/JIS/EN.
2) Yield strength:235 MPA-460MPA
3) Voltage Grade:10-1000KV
4)Type of Conductor: vertical,triangle,horizontal.
5) Wind velocity:23.5m/s-35m/s.
6) Span:Below 1000m.
7) Height:5-80M
8) Surface Treatment:Hot dip galvanized,Painting,spray-paint.
9) Coating Thickness:According to your requirement.
1.0mm Ribbon Connector is commonly used in electronic devices to connect ribbon cables. It is a type of connector that has a pitch of 1.0mm, which means that the pins are spaced 1.0mm apart. This connector is designed to be used with ribbon cables that have a similar pitch.
The 1.0mm Ribbon Connector is typically used in applications where a high-density connection is required. It is commonly used in computer systems, printers, and other electronic devices that require a high-speed data transfer.
1.0Mm Ribbon Connector,Flat Cable Connector,Flat Ribbon Cable Connector,Flat Ribbon Connector
YUEQING WEIMAI ELECTRONICS CO.,LTD , https://www.weimaiwafer.com