Henley Designed (J Series) 400A Pole Mounted Fuse Cutout

Pole Mounted Fused Cut-out 400A

The WT Henley, industry Standard design, 400A rated fused Cut-out is one of our best seling products.

Designed with ease of use and simplicity in mind, this pole mountable fused Cut-out is the ideal method of providing rural dwellings with a safe, protected and reliable low voltage power supply.

Manufactured from our own track resistant grade of Glass Re-inforced Polyester. This fused Cut-out is unobtrusive in appearance and vandal resistant, when compared to many of the more traditional materials such as porcelain.

Each fused Cut-out has fuse contacts and cable terminal plates which are manufactured from copper and brght tinned. These plates incorporate M12 captive studs with nuts and washers for the reception of cable sockets(lugs) up to 300mm2 )*compression type only at 300mm2) with copper or aluminum conductors.

For ease of mounting to either a wall or a wooden pole, the fused Cut-out is supplied with an M12 coach screw.

For cross-arm type mounting the Fused Cut-out can be supplied with an M12 nut, bolt and washer.

Fuse Link(J type)

This fused Cut-out is designed to accommodate standard wedge type fuse links to BS88 Part 5: 1988. Tested and approved for category of duty 415AC80.

Fixing centre requirement is 82mm.

Standard Fuse link ratings range from 20 to 400A.

400A Pole Mounted Fused Cut-out
1. Moulded in light grey glass reinforced polyester DMC.
2. Accepts BS 88 J type fuse link...
HDCO Heavy duty cut-out GF200
1. Moulded in light grey glass reinforced polyester DMC.
2. Current: 400A.
3. Accepts BS 88 J type fuse link on phases.
4. Fuse carriers with 82mm centres.
5. Lift off cover with securit sealing facilities.
6. Two part detachable cable trough.
7. Cable size: 300mm2.
8. Threecable entry positions by either brass gland or PVC grommet.
9. Cable exit by wooden or closed cell foam cable bush.
10. Available with shear head mechanical connectors on incoming or outgoing terminals.
11. Variable enutral/earth terminations solutions to suit specifiers' requirements.
12. Incoming connections can be insulated/shrouded whilst outgoing connections are being terminated.
13. All cable terminations manufactured in hard drawn copper.
14. Suitable for both PME and SNE applications.
15. Top plate adaptor available to connect with metering cabinet.

Packing:  per unit into one Foam Box, 8 Boxes into one carton; Carton size: 53.3x44.3x38.5cm, G.W./N.W.: 16.8/15.8Kgs.

Fuselinks
This fused Cutout is designed to accommodate standard wedge 'J' type fuselinks to BS 88 with 82mm fixing centres.
Standard fuselink ratings range from 20 to 400A

Buzzer

Three Feet of Smoke Buzzer, Alarm Piezoelectric Buzzer, Passive Piezoelectric Buzzer

Tengqiang Electronics Co.Ltd , http://www.xingdaele.com