Cu or Al-Plastic Insulation Tape Shield Control Electrical Cable

Model NO.: Al(Cu)/PVC/PVC
Wire Core Material: Cu/Al
Certification: ISO, CCC, CE
Model: Al(Cu)/PVC/PVC
Brand: Hongda
Core: 1, 2, 3, 4, 5, 6 Cores etc.
Trademark: Hongda
Transport Package: Wooden Drum
Origin: Zhengzhou China
HS Code: 8544492100
Model NO.: Al(Cu)/PVC/PVC
Wire Core Material: Cu/Al
Certification: ISO, CCC, CE
Model: Al(Cu)/PVC/PVC
Brand: Hongda
Core: 1, 2, 3, 4, 5, 6 Cores etc.
Trademark: Hongda
Transport Package: Wooden Drum
Origin: Zhengzhou China
HS Code: 8544492100

Cu or Al-plastic insulation tape shield control shielded screen electrical cable
Cu or Al-Plastic Insulation Tape Shield Control Electrical Cable



Products for distribution networks or industrial installations, rated voltage 1KV(Um=1.2KV) and below fixed installed lines for transmission and distribution energy.

Product Standards

This product implements GB/T 12706.1 and GB/T 12706.3 standard. At the same time, flame-retardant cable also conforms to GB/T19666 standard.

All standards used in this product are the latest version issued by the country.

Working Temperature

Maximum rated temperature of cable conductor is 90 ºC. Maximum temperature of cable conductor not exceeding 250 ºC for short circuit (Maximum duration not exceeding 5 s).

Laying Condition

  The ambient temperature at the time of laying the cable shall not be less than 0 ºC.

 

Type

Name

Main scope of use.

 

YJV  YJLV

YJY  YJLY

Copper core, aluminum core XLPE insulated PVC (polyolefin ) sheathed power cable

Laid indoors, in tunnels, in pipes and in cable trenches, etc., cables cannot withstand pressure and mechanical forces

 

YJV22   YJLV22

YJY23  YJLY23

YJV62  YJLV62

YJY63  YJLY63

Copper core, aluminum core XLPE insulated (non-magnetic) steel tape armoured PVC  (polyolefin ) sheathed power cable

Laid in indoor, tunnel, cable trench directly buried in soil, cable can withstand mechanical pressure

 

YJV32  YJLV32

YJY33  YJLY33

YJV72  YJLV72

YJY73  YJLY73

Copper core, aluminum core XLPE insulated (non-magnetic) steel wire armored PVC (polyolefin ) sheathed power cable

Place with drop or vertical laying, capable of bearing mechanical pull

Certificate
Cu or Al-Plastic Insulation Tape Shield Control Electrical Cable

Contact Us
If you have more questions, please contact with Ellen Zhang.
Ellen Zhang
Phone 86 150 0380 6907
  
   


Factory
Cu or Al-Plastic Insulation Tape Shield Control Electrical Cable

 Henan Hongda Cable Co., Ltd. located in No. 3, Changping Road, ZhanDian District, Jiaozuo, Wuzhi. Our factroy established in March of 2004. Our owns registered capital of RMB Fifty-one million six hundred and eighty thousand. Hongda Cable
covers an area of 100,000 square meters, including 50,000 square meters of building area. We have more than 120 staff members and professional workers. our fixed assets of 90,000,000. We can provide more than 100 varieties, tens of thousands of specifications of wire and cable, with 10000 km annual production capacity
     Henan Hongda Cable Co. Ltd. is the original Zhengzhou Hongda Cable Co. Ltd. established enterprise expansion. The company is committed to system R&D, design, manufacturing, marketing and service of cable products,We mainly aim at managing cross-linking XLPE insulated power cables, PVC insulated power cables, plastic insulated control cables, insulated overhead cables, and stranded aluminum and ACSR. At present, the cables' biggest cross area is 800 square meters with a maximum electric power of 35KV. The company has more than 300 (sets) domestic and oversea-leading production and testing equipment.

Packing and Transportation
Cu or Al-Plastic Insulation Tape Shield Control Electrical Cable


We provide you with the best product packaging design services, thereby allowing you to save more shipping charges

FAQ
   Q: Are you the factory or the trading company?

    A: We are the factory. 
   Q: How long is your guarantee Period?
    A: We uaually offer 1 year guarantee for our general products.
   Q: How can I get the samples?
    A: We can make the sample order. And usually we will charge for it. 
        But the samples fee will be return to you when you make the bulk order.
   Q: Where is your factory? How can we visit your factory?
    A: Our factory located in Zhengzhou city, Henan Province. You could reach here by train and by air.
        We can pick you up in the airport and the railway station.
   Q; What is your MOQ?
    A: It`s base on the cable type or wire type. Please contact me. We will let you know.

Cu or Al-plastic insulation tape shield control shielded screen electrical cable
Cu or Al-Plastic Insulation Tape Shield Control Electrical Cable



Products for distribution networks or industrial installations, rated voltage 1KV(Um=1.2KV) and below fixed installed lines for transmission and distribution energy.

Product Standards

This product implements GB/T 12706.1 and GB/T 12706.3 standard. At the same time, flame-retardant cable also conforms to GB/T19666 standard.

All standards used in this product are the latest version issued by the country.

Working Temperature

Maximum rated temperature of cable conductor is 90 ºC. Maximum temperature of cable conductor not exceeding 250 ºC for short circuit (Maximum duration not exceeding 5 s).

Laying Condition

  The ambient temperature at the time of laying the cable shall not be less than 0 ºC.

 

Type

Name

Main scope of use.

 

YJV  YJLV

YJY  YJLY

Copper core, aluminum core XLPE insulated PVC (polyolefin ) sheathed power cable

Laid indoors, in tunnels, in pipes and in cable trenches, etc., cables cannot withstand pressure and mechanical forces

 

YJV22   YJLV22

YJY23  YJLY23

YJV62  YJLV62

YJY63  YJLY63

Copper core, aluminum core XLPE insulated (non-magnetic) steel tape armoured PVC  (polyolefin ) sheathed power cable

Laid in indoor, tunnel, cable trench directly buried in soil, cable can withstand mechanical pressure

 

YJV32  YJLV32

YJY33  YJLY33

YJV72  YJLV72

YJY73  YJLY73

Copper core, aluminum core XLPE insulated (non-magnetic) steel wire armored PVC (polyolefin ) sheathed power cable

Place with drop or vertical laying, capable of bearing mechanical pull

Certificate
Cu or Al-Plastic Insulation Tape Shield Control Electrical Cable

Contact Us
If you have more questions, please contact with Ellen Zhang.
Ellen Zhang
Phone 86 150 0380 6907
  
   


Factory
Cu or Al-Plastic Insulation Tape Shield Control Electrical Cable

 Henan Hongda Cable Co., Ltd. located in No. 3, Changping Road, ZhanDian District, Jiaozuo, Wuzhi. Our factroy established in March of 2004. Our owns registered capital of RMB Fifty-one million six hundred and eighty thousand. Hongda Cable
covers an area of 100,000 square meters, including 50,000 square meters of building area. We have more than 120 staff members and professional workers. our fixed assets of 90,000,000. We can provide more than 100 varieties, tens of thousands of specifications of wire and cable, with 10000 km annual production capacity
     Henan Hongda Cable Co. Ltd. is the original Zhengzhou Hongda Cable Co. Ltd. established enterprise expansion. The company is committed to system R&D, design, manufacturing, marketing and service of cable products,We mainly aim at managing cross-linking XLPE insulated power cables, PVC insulated power cables, plastic insulated control cables, insulated overhead cables, and stranded aluminum and ACSR. At present, the cables' biggest cross area is 800 square meters with a maximum electric power of 35KV. The company has more than 300 (sets) domestic and oversea-leading production and testing equipment.

Packing and Transportation
Cu or Al-Plastic Insulation Tape Shield Control Electrical Cable


We provide you with the best product packaging design services, thereby allowing you to save more shipping charges

FAQ
   Q: Are you the factory or the trading company?

    A: We are the factory. 
   Q: How long is your guarantee Period?
    A: We uaually offer 1 year guarantee for our general products.
   Q: How can I get the samples?
    A: We can make the sample order. And usually we will charge for it. 
        But the samples fee will be return to you when you make the bulk order.
   Q: Where is your factory? How can we visit your factory?
    A: Our factory located in Zhengzhou city, Henan Province. You could reach here by train and by air.
        We can pick you up in the airport and the railway station.
   Q; What is your MOQ?
    A: It`s base on the cable type or wire type. Please contact me. We will let you know.

Education Projector

Educational projectors are mainly aimed at classroom teaching by school teachers; traditional projectors are not easy to carry. Due to the naughty students in school classrooms, projectors are not safe to place in classrooms and are easily damaged by students. The portability of educational micro-projectors makes up for teaching Vacancy, it is convenient for teachers to give lectures and only need to store the materials in the projector and show them to students for teaching, saving the trouble of textbooks and handwriting with pens and chalks. Its general weight will not exceed 0.2Kg, and some do not even need fan cooling or ultra-small silent fan cooling.

Educational projectors need to have:

1. Clear handwriting Educational projectors most often display text and images, at least a resolution of 1024*768 or more, and a contrast ratio of more than 3000 lumens, so that students in the back row can see the projection clearly

2. Short-focus large screen;

3. Accurate color;

4. Easy operation;

5. Features such as multiple connection methods.

education projector,education use projector,smart education projector,best education projectors,projector for education

Shenzhen Happybate Trading Co.,LTD , https://www.szhappybateprojectors.com

Posted on