When many engineers use an oscilloscope to measure the switching power supply output signal, they will find mutual interference between the two measurement channels. Does this interference come from between channels? Let's test it out.
I. Background overviewWhen using an oscilloscope to measure the switching power supply output signal, it is found that there is mutual interference (crosstalk) between the two measurement channels. So will the two measurement channels interfere with each other?
Test method: channel 1 measures small signal (100mv/div), channel 2 measures large signal (5V/div), and observes the mutual influence of signals.
Ø First use the standard signal source to verify the influencing factors of channel isolation;
Ø Then use different measurement methods to verify the influencing factors of crosstalk.
Second, channel isolation test verificationAs shown in Figure 1, the two-channel input signal is directly output from the signal generator. It can be found that the channel 2 signal has no effect on channel 1, and the channel isolation is good. Of course, the channel isolation index has a more rigorous test method, here is a simple test.
Figure 1 CH1, CH2 measurement signal generator output, good grounding
Third, the real cause of interference - ground!The above interference is mainly related to the use of the probe, especially related to the connection of the probe ground. The measurement process is as follows, and the crosstalk of the test mode is recorded:
1. Channel 1 probe grounded with alligator clip, channel 2 closed (proving channel 1 signal as it is, see Figure 2)
Figure 2 CH1 uses a clip to measure the power output, CH2 is left floating
Note: Although the channel 1 signal amplitude is very small, it can still locate the interference of 600K frequency point by FFT analysis.
2. Channel 1 and 2 probes use only alligator clips to connect one ground (crosstalk is very serious, see Figure 3);
Figure 3 CH1 uses a clip to measure the power output, CH2 uses a clip to measure the inductance, single point ground
3. Channels 1 and 2 are grounded separately using the alligator clips (serious crosstalk, see Figure 4);
Figure 4 CH1 uses a clip to measure the power output, CH2 uses a clip to measure the inductance, each grounded
4. Channel 1 is grounded using spring, channel 2 is grounded with alligator clips (crosstalk is small, Figure 5);
Figure 5 CH1 uses a grounding spring to measure the power output, and CH2 uses a clip to measure the inductance, each grounded
5. Channels 1 and 2 are grounded separately using springs (minimum crosstalk, see Figure 6);
Figure 6 CH1 uses a grounding spring to measure the power output, and CH2 uses a grounding spring to measure the inductance, each grounded
Fourth, summary· When the measuring probe and the ground wire are well connected, the inter-channel interference of the oscilloscope is small;
· Interference from the effects of ground parasitic parameters at the test probe, such as lead inductance;
· When measuring two signals at the same time, in order to avoid mutual interference of the ground loop, separate grounding;
• Use a grounding spring when measuring sensitive signals and use interface terminals if necessary.
A TPU Screen Protector made of the super toughness of the honeycomb structure. Its unique ultra-soft properties allow it to cover the most complex curves and contours in a device.
The self-healing design of the Hydrogel Screen Protector can protect the display screen of the device from damage, leave no air bubbles, and maintain the sensitivity of the touch screen. Advanced anti-fingerprint and dust- and oleophobic overlays keep your screen smudge- and dirt-free. This overlay is also important in providing maximum touch sensitivity for improved high-speed glide and optimal touch response.
The optical transparency of the Hydrogel Film is more than 90%, showing you the most original screen color and bringing the most realistic visual experience.
If you want to know more about the product information of the Hydrogel Screen Protector for Huawei, please click the product details to view the parameters, model, picture, price and other information of the Huawei Screen Protector.
Whether you are a group or an individual, we will do our best to provide you with accurate and comprehensive information about Hydrogel Screen Protectors!
Screen Protector For Huawei,Hydrogel Film for Huawei,TPU Screen Protector for Huawei,Hydrogel Screen Protector for Huawei
Shenzhen Jianjiantong Technology Co., Ltd. , https://www.mct-sz.com