The infrared Platinum Dragon from OSRAM Opto Semiconductors provides a high radiance from a small surface. With its 1 mm???thin-film chip in stack technology it generates an optical output of almost 1 W from a driving current of 1 A ??? The viewing angle and radiant intensity can be varied with standard secondary optics. Preferred applications are those which require high radiance so that small optics can be used. This is Important for example in pedestrian protection systems and night vision systems in vehicles.
The increased output of the new Platinum Dragon is based on a special thin-film chip. It has not only one pn junction, but two that have been grown or ?tacked???one on top of the other. This stack technology leads to Almost twice the optical output power compared to conventional IR thin-film chips. ?e were able to bring the infrared Stack Dragon so quickly to the market thanks to our experience in developing the stack technology for our lasers???said Harry Feltges, Marketing Manager for Infrared Components at OSRAM Opto Semiconductors. ?urthermore, its package is the same as the one used for the other IR Dragon components, so existing designs can be used without modification.???
???
The forward voltage of 2.9 V at 1 A enables standard LED drivers to be used which are preferably operated in this voltage range. The IR LED emits at a wavelength of 850 nm and is therefore a perfect compromise between maximum spectral sensitivity for CCD and CMOS cameras And suppress visibility for the human eye.
With its high optical output from a small surface area the infrared Platinum Dragon is ideal for lighting solutions where space is an important factor. Night vision systems in vehicles, pedestrian protection systems and precrash sensors can also be made much more compact because fewer IR LEDs are In industrial applications the high-power IR LEDs can be used in illumination units for CCTV cameras or in systems for automatic number plate recognition (ANPR). 3-D camera technology is another possible application which will be For more, high modulation frequencies of the light source (typically 20 to 50 MHz) are required, which can be easily achieved with the new infrared Dragon.
Press contact:
OSRAM
Marion ReichlTel:???49-941-850-1693Fax:???49-941-850-4441693
N-net 8 ports POE Switch series support 8 port 10/100M or gigabit PoE ports and various uplink choices like RJ45 port, fiber ports and so on. Unmanaged and managed are optional. It also support IEEE802.3 af/at standard, up to 30W PoE output per port, with total power budget 130W or 250W (Built-in power supply).
It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
This series PoE switch is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, it is an ideal choice for expanding your home or office network.
POE Switch 8 Ports,8-Port POE Ethernet Switch,POE Switch 8 Port,Gigabit POE Switch 8 Port,10/100M 8 Ports POE Switch, 10/100M POE Switch 8 Ports
Shenzhen N-net Technology Co.,Ltd , http://www.nnetswitch.com