Recently, the method of measuring heartbeat and pulse using LED has been adopted by Japanese universities and Toyota. In this method, a light-emitting module using an LED and a light-receiving module using a phototransistor are disposed in a portion where a finger or the like is touched, and hemoglobin in blood is easily absorbed by light of a specific wavelength such as green, and the finger is illuminated by the LED. Reflect light to detect the pulse.
This method is widely used. In June 2013, Nippon Wireless began selling a universal pulse sensor that integrates green LEDs and phototransistors in one package.
Nihon University said that the "phase shift method" technology developed by the university's tail stock professor was used in combination with the method of measuring pulse by LED. Japanese universities did not disclose specific mechanisms, but Professor Tail said that "the phase shift method can greatly improve the signal-to-noise ratio, so you can get a very accurate pulse waveform. Because of this, the pulse can be converted into blood pressure."
Professor Tail has recently successfully integrated the core part of the data processing with phase shifting on a chip. He said that the chip size is currently 1cm 2 square, but "the miniaturization of several mm squares has already been seen. It can be installed in a portable terminal, so it is expected to realize the way of measuring the pulse and blood pressure with a smart phone using the LED used as a flash for a smartphone. The University of Japan intends to launch the chip in cooperation with its partners in 2013.
This method is widely used. In June 2013, Nippon Wireless began selling a universal pulse sensor that integrates green LEDs and phototransistors in one package.
Nihon University said that the "phase shift method" technology developed by the university's tail stock professor was used in combination with the method of measuring pulse by LED. Japanese universities did not disclose specific mechanisms, but Professor Tail said that "the phase shift method can greatly improve the signal-to-noise ratio, so you can get a very accurate pulse waveform. Because of this, the pulse can be converted into blood pressure."
Professor Tail has recently successfully integrated the core part of the data processing with phase shifting on a chip. He said that the chip size is currently 1cm 2 square, but "the miniaturization of several mm squares has already been seen. It can be installed in a portable terminal, so it is expected to realize the way of measuring the pulse and blood pressure with a smart phone using the LED used as a flash for a smartphone. The University of Japan intends to launch the chip in cooperation with its partners in 2013.
Fiber Optical Distribution Box(Metal) Fiber Optic Distribution Box is specially designed for FTTH or FTTB for Indoor/Outdoor application. It is can manage single,ribbon & bundle fiber cables. It consists of splicing, distribution and panel with ensures the excess fiber cords and pigtails in good order, no interval and easy for management and operation. It offers mufti-functions of distribution management.
Indoor Fiber Optical Distribution Box(Metal)
Indoor Fiber Optical Distribution Box(Metal),Fiber Optic Distribution Cabinet,Metal Electrical Boxes,Metal Equipment Cabinet
Sijee Optical Communication Technology Co.,Ltd , https://www.sijee-optical.com