As LEDs are introduced into the indoor and outdoor lighting markets, the price of LED lighting has also dropped sharply. However, the uneven quality has also caused problems. It is pointed out that LED lighting specifications have been set up everywhere, and a number of mandatory lighting standards will start from 2012. On the road, it will be expected to accelerate the elimination of the vicious competition of inferior goods, and then drive the LED lighting market shuffling effect.
Due to the increasing popularity and diversity of LED lighting applications, Taiwan's "Ministry of Economic Affairs" Standards Bureau has successively formulated a number of LED lighting standards in recent years. Following the development of LED streetlight specifications, the world's leading countries announced that three common LED indoor lighting standards were issued at the end of 2010, including LED T8 straight tube tube, LED flood light and light steel frame light (including flat panel light), etc., the industry pointed out that although the relevant standard specifications have been fixed, LED street lamps have been promoted for many years, and it is expected to expand installation in 2012, due to The slow introduction of the government and the budgeting operations are not expected to be released until 2013~2014.
Despite the rapid development of the LED industry, due to the large differences in climate and environment in various regions, the industry standards have not yet entered the national standard project, and each province has led the establishment of regional LED lighting standards. However, it is pointed out that the NDRC will adopt LED lighting technology in the near future. The standard, indoor LED downlights as a priority project, is expected to be finalized after the technical specifications, in 2012 under the promotion of the mainland's 12th Five-Year Plan, the central government announced that the LED indoor lighting subsidy financial program will be expected to expand implementation.
As for the entry of LED lighting products into the European Union, it is necessary to pass CE certification. Considering that electromagnetic radiation may cause harm to the human body, the EU has also announced that it will enforce the human body electromagnetic radiation safety standard from 2013.
As the US Environmental Protection Agency announced the new version of solid-state lighting and light source products in October 2011, the industry pointed out that the recent LM-80's light decay test is expected to be enforced from April 2012. After the standardization, the future North American market luminaire manufacturers will give priority to purchasing LED products that have passed LM-80 verification. For the unproven Taiwan LED packaging and die factory, it will be hindered to enter the US market in the future.
Because the LM-80's light decay verification takes 6,000 hours to test, it takes 6-8 months. Some LED industry believes that LED product specifications and technology are changing with each passing day. After several months, LED lighting verification standards may be It will change, so this certification remains doubtful, but the Taiwan Industrial Technology Research Institute said that the LM-80 is considered to be a ticket to the US market, and the manufacturer must issue a report certificate for the LM-80 (LED Lumen Maintenance) test. Obtaining the ENERGY STAR label, the North American Institute of Lighting Engineering (IES) has also set the LM-80's optical attenuation test standard, which not only provides measurement standards for LED applications, but also provides quality assurance for consumers, and will become common worldwide. Testing standard.
Due to the increasing popularity and diversity of LED lighting applications, Taiwan's "Ministry of Economic Affairs" Standards Bureau has successively formulated a number of LED lighting standards in recent years. Following the development of LED streetlight specifications, the world's leading countries announced that three common LED indoor lighting standards were issued at the end of 2010, including LED T8 straight tube tube, LED flood light and light steel frame light (including flat panel light), etc., the industry pointed out that although the relevant standard specifications have been fixed, LED street lamps have been promoted for many years, and it is expected to expand installation in 2012, due to The slow introduction of the government and the budgeting operations are not expected to be released until 2013~2014.
Despite the rapid development of the LED industry, due to the large differences in climate and environment in various regions, the industry standards have not yet entered the national standard project, and each province has led the establishment of regional LED lighting standards. However, it is pointed out that the NDRC will adopt LED lighting technology in the near future. The standard, indoor LED downlights as a priority project, is expected to be finalized after the technical specifications, in 2012 under the promotion of the mainland's 12th Five-Year Plan, the central government announced that the LED indoor lighting subsidy financial program will be expected to expand implementation.
As for the entry of LED lighting products into the European Union, it is necessary to pass CE certification. Considering that electromagnetic radiation may cause harm to the human body, the EU has also announced that it will enforce the human body electromagnetic radiation safety standard from 2013.
As the US Environmental Protection Agency announced the new version of solid-state lighting and light source products in October 2011, the industry pointed out that the recent LM-80's light decay test is expected to be enforced from April 2012. After the standardization, the future North American market luminaire manufacturers will give priority to purchasing LED products that have passed LM-80 verification. For the unproven Taiwan LED packaging and die factory, it will be hindered to enter the US market in the future.
Because the LM-80's light decay verification takes 6,000 hours to test, it takes 6-8 months. Some LED industry believes that LED product specifications and technology are changing with each passing day. After several months, LED lighting verification standards may be It will change, so this certification remains doubtful, but the Taiwan Industrial Technology Research Institute said that the LM-80 is considered to be a ticket to the US market, and the manufacturer must issue a report certificate for the LM-80 (LED Lumen Maintenance) test. Obtaining the ENERGY STAR label, the North American Institute of Lighting Engineering (IES) has also set the LM-80's optical attenuation test standard, which not only provides measurement standards for LED applications, but also provides quality assurance for consumers, and will become common worldwide. Testing standard.
Led Usb Cable advantage:
Hot selling colors gradual change color LED Usb Cable flashing data charging cable for ios ,for android,100% Brand New and High Quality.
Standard USB 2.0 Cable.Start syncing your phone with a PC today through this premium quality Data Cable.All the Cellphones with Micro USB Port
LED USB Cable
Led Usb Cable,Durable Usb Cable,Mini Usb Adapter Cable,Led Light Usb Charger Cable
Dongguan City Leya Electronic Technology Co. Ltd , https://www.dgleya.com