LED industry practitioners must--LED lamp common sense and classification

1.LED fluorescent lamp
LED fluorescent lamps are mainly divided into T8 and T5 and T10 is a classification of their diameter:
The standard diameter of the T8 is 26mm
The standard diameter of the T5 is 16mm
The standard diameter of the T10 is 30mm
Most manufacturers on the market put T8 and T10 universal
2. LED hose light strip (also called soft light strip)
The LED hose light strip is in the form of a thick rope. It is a PVC material. It is usually installed on the inner side of the ceiling or the back side of the background wall. It is strip-shaped and emits a strip of light after the lamp is illuminated on the top or wall. Soft and elegant.
3.LED wall light
The wall lighting can also be used for partial lighting above the bed, in front of the mirror, by the door, in the corridor, in the kitchen, etc. The wall lamp is a decorative lamp mounted on the wall. The mounting position is slightly higher than the height of the human eye when standing. It can be used as auxiliary lighting and alternately in the living room where the chandelier and the ceiling lamp are illuminated, which saves electricity and can adjust the indoor atmosphere.
4.LED ceiling light
The ceiling lamp is a luminaire that is directly fixed to the ceiling and is suitable for installation in a low-rise room. The traditional light source, that is, the bulb is mainly incandescent and fluorescent. Most of the ceiling lamps with incandescent lamps are light-colored plastic covers or glass covers. The ceiling lamp with fluorescent lamp as the light source mostly uses plexiglass, and the metal grid is used as the cover. Ceiling lights with a diameter of about 200mm are suitable for use in aisles, bathrooms and kitchens. A ceiling lamp with a diameter of about 400 mm can be used in a room of about 16 m2. At present, the conventional light source before the replacement of the LED light source constitutes an LED ceiling lamp.
5.LED chandelier
LED chandeliers are usually the protagonist of household lighting , and the variety is also more diverse. According to the shape structure, it can be divided into branches, flowers, prototypes, squares, lanterns, and suspensions. Only branch chandeliers, there are three forks, four forks, five forks, six forks ...; according to the number of lamp heads, can be divided into single head, three forks three fires, three forks four fires ...; according to the material of the components, there are metal components and plastic According to the nature of the bulb, it can be divided into incandescent lamps, fluorescent lamps, and low-power candle lamps; according to the size and volume, it can be divided into large, medium and small. Commonly used in living rooms and living rooms with a height of more than 3m.
6.LED spotlights (LED light cups)
LED shooting light line has strong directionality, good light color, and color temperature is generally 2700-9000K. Generally, there are various lamp holders, which can be adjusted in height, left and right, single and can be grouped. The lamp head can be rotated at different angles. It can be adjusted according to the different positions of the working face, small and exquisite, and easy to use.
Spotlights are usually installed on the wall or the top surface, and are often used in key parts of the room decoration, such as hanging noodles, crafts or drawing tables. Because spotlights are more irritating to the eyes, they should not be used directly for indoor lighting. Used to illuminate walls or specific objects. However, it is not advisable to use the spotlights too much in the room. Because of the large amount of heat accumulated, it will generate high temperature in a short time. If it is used for a long time, it may cause fire. (The light source that can be used is COB , SMD, imitation lumens, etc.)
7. LED downlight (LED ceiling light)
The LED downlight is covered with a cylindrical lampshade on the light source, embedded in the ceiling or equipped with a fixture, and fixed in places where local illumination is required, such as bedside, bookshelf, sofa, etc. An embellishment and a uniform light source are formed on the ceiling to complement the main lamp. The active downlight can be set freely according to the lighting needs. It has multiple lights, flexible movement, convenient use and no space. (The light source that can be used is COB, SMD, imitation lumens, etc.)
8. Discharge lamp
An electric light that illuminates a current through a special vapor or gas to produce light or radiant energy close to visible light.
9.LED flood light
A light projector designed to illuminate a scene or object when the lighting requirements of the reference scene or object are much stronger than its background.
Modern lighting can not only play an important role in lighting, but also a must for home decoration.
10. LED Bulb
Bulbs are also well understood, that is, the incandescent lamps that everyone used in their homes have now been eliminated. There are two specifications, which are distinguished from the base. One is E27, and the E27 lamp is the most commonly used screw light. There is also a kind of lamp that is relatively small in E14. It is mainly used on the top of the candle light. (I will not introduce all the candle lights. I will put it in the bulb, in fact, it is a lamp like a candle flame.) The bulb is formed by replacing the conventional light source with an LED light source. (The light source that can be used is COB, SMD, imitation lumens, etc.)
11. LED high bay light
The mining lamp is mainly used in industrial lighting. The size is small. The size of the large lampshade can be 1 meter or more. The mining lamp belongs to the high-power lamp. As long as the LED high-power lamp is very energy-saving.
12.LED wall washer
It is mostly used for landscape lighting. The meaning of a little spotlight is to sprinkle the light on the wall. It feels like the wall has been washed. It is mainly used for well-known or majestic buildings, such as bridges, museum exterior wall lights.
13. LED street light
LED street lights are street lights made with LED lamp beads .
14.LED table lamp
LED table lamp is mainly used for reading and writing. Its color rendering index is generally required to be above 90, so don't think that bright is a good table lamp, and the color rendering index is not equal to brightness.
15.LED ceiling light: LED ceiling light is actually a small downlight
16.LED flood light
The LED floodlights illuminate the luminaires that specify illumination on the illuminated surface that is higher than the surrounding environment. Also known as the spotlight. Typically, it can be aimed in any direction and has structures that are unaffected by climatic conditions. Mainly used for large-area job mines, building outlines, stadiums, overpasses, monuments, parks and flower beds. Therefore, almost all large-area lighting fixtures used outdoors can be regarded as floodlights.
17.LED buried lights
LED buried lights are buried directly in the ground, the sealing is better, not easy to break, and the underwater lights are very similar, the general IP level is much larger IP68!
18.LED lawn light
The shape of the lamp is a bit like a pillar, and the diameter is only about 8CM. At night, he can illuminate the lawn.
19. LED obstacle light fixture
This kind of person may be a bit strange, but as far as I can tell you, he mainly uses it for model lighting, such as traffic lights on the road, car taillights, safety exit signs, track lights for airplane landings, signal lights, in fact, the lights use LEDs. It has been quite extensive!
20.LED underwater
Placed in a pool or swimming pool or fountain pool, the average IP rating is 68
21. LED display :
It is a screen that can come out with words or animation effects. It is made of LED lamp beads. Common words are the monochrome screen of the door and the full color screen of the commercial square. There is also a two-color screen.
22. LED digital tube ;
Mostly for decorative lighting, the exterior of a common building, similar to the traditional neon lights, showing a line or surface effect
23. LED point light source;
On the wall outside the common building, the effect of the point is more
24.LED Starlight:
For decoration, it is similar to the light emitted by the stars, and can be used indoors and outside the building.

  crawler tractors are versatile,domestic initiative and technology leading. Hydraulic controlled differential - brake turn to technology , 360 degree steering wheel control and spin turn are our company`s unique advantages. In addition, our products also have the superiorities of triangular track drive, low grounding pressure and better Paddy field performance. Our company has iron crawler tractor and Rubber Crawler Tractor, which two main products. Every products have different types. These products are of high efficiency, long operating life. and low fuel consumption. Our crawler tractors are easy switching between hydraulic infinitely variable speed and mechanical transmission.


Model

NF-Y602

NF-Y702

NF-Y802

Size

length×width×height(mm)

2900×1360×1500

3430×1590×2300

Weight

(Kg)

1700

2200

Minimum Ground Clearance

(mm)

260

410

 

Engine

 

 

 

 

 

Model

3G25TC

YD4CZ70C1

YD4SZ80C1

Form

Electronic injection.vertical.water-cooled.four-stroke

Rated power(kW)

44.1

51.5

58.8

Fuel

Diesel

Rated power(r/min)

2400

Starting method

Electric start

Steering Brake System

 

Steerig system type

Planetary differential steering

Brake system type

Wet friction steering

Drive Train

Clutch type

Single-chip single-acting

 

Transmission type

2(mechanical file)+2×2(hydraulic stepless speed change)

 

Transmission shift model

Gear shift

Walking System

Rack form

Rigid frame type

 

Track pitch section×number×width

90×46×280

90×50×350

 

The theoretical speed of each file(km/h)

Forward:mechanical block:4.86; 8.65    Hydraulic block:0-5.75; 0-10.24

 

 

Back:0-5.75;0-10.24

Working Device

Lifter type

Semi-split

 

Tillage depth control

Force adjustment

 

PTO form

Type1,non-independent

 

Power output shaft speed(r/min)

624/960








































Model

NF-702

NF-802

NF-902

Size

length×width×height(mm)

3690×1500×2400

3690×1650×2560

Weight

(Kg)

2255

2450

Minimum Ground Clearance

(mm)

395

420

Engine

Model

YD4CZ70C1

YD4EZ80C1

YD4EZ90C1

Form

Electronic injection.vertical.water-cooled.four-stroke

Rated power(kW)

51.5

58.8

66.2

Fuel

Diesel

Rated power(r/min)

2400

Tarting method

Electric start

Steering Brake System

Steerig system type

Planetary differential steering

Brake system type

Wet friction steering

Drive System

Clutch type

Single-chip single-acting

Transmission type

Eight forward speed+ reverse gear

Transmission shift model

Gear shift

Walking System

Rack form

Rigid frame type

Track pitch section×number×width

90×51×400

90×56×400

The theoretical speed of each file(km/h)

Ahead:1.22;1.80;2.92; 3.84;5.50;8.08;13.13;17.25

Backward:0.97;1.43;2.32;3.04;4.36;6.41;10.42;13.68

Working Device

Lifter type

Semi-split

Tillage depth control

Force adjustment

PTO form

Type1,non-independent

Power output shaft speed(r/min)

720/1000

PTO shaft spline and the outer diameter mm

8×38


Model

NF-Q502

NF-Q602

NF-Q702

NF-Q802

Size

length×width×height(mm)

3430×1590×2300

Weight

(Kg)

1715

1890

1930

1990

Minimum Ground Clearance

(mm)

395

Engine

Model

YD4C50V1

YD4JZ60C1

YD4CZ70C1

YD4SZ80C1

 

Form

electronic injection.vertical.water-cooled.four-stroke

 

Rated power(kW)

36.8

44.1

51.5

58.8

 

Fuel

diesel

 

Rated speed(r/min)

2400

 

Starting method

Electric start

Steering Brake System

Steerig system type

Tooth embedded clutch-braking

 

brake system type

Wet friction type

Drive System

clutch type

Monolithic single-acting

 

transmission type

Main transmission (hydraulic stepless speed + mechanical gear)

+auxiliary transmission 2 files

 

transmission shift model

Gear shift

Walking System

rack form

Rigid frame type

 

track pitch section×number×width

90×46×350(with side teeth)

90×50×350(with side teeth)

 

the theoretical speed of each file(km/h)

Hydraulic:high0-9.2;low0-6.2

 

 

mechanical:8.2;5.3

Working Device

lifter type

Semi-split type

 

tillage depth control

Bit adjust(optional force adjust)

 

PTO form

Type1, non-independent

 

power output shaft speed(r/min)

620/960

 

PTO shaft spline and the outer diameter mm

8×38



If you have any questions, please contact with us directly. Crawler tractors are produced

by our company with high quality and good appearance. Welcome you can visit our factory.for

inqury,Please send mail directly to us!


Rubber Crawler Tractor

Small Crawler Tractor,Rubber Crawler Tractor,Triangular Crawler Structure,Convenient Control Crawler Tractor

Hunan NongFu Machinery&Electronic.Co., Ltd. , https://www.nfagmachine.com

Posted on