First, the hardware preparation
1. One DVI line (DVI line turns to the end of the line)
2, 2 Lingxing 802 send card 3, a 10-pin cable
Second, the hardware connection
1. Use the ten-pin cable to cascade the two sending cards, as shown in Figure 1.
Figure 1 Connect two sending cards with a 10-pin cable
2. There is a red button on each of the 802 sending cards. Set the button of one of the sending cards to 1, and the button of the other sending card does not change. As shown in Figure 2.
Figure 2 button settings
Aluminum Electrolytic Capacitors/ Ceramic Capacitors
Aluminum Electrolytic Capacitors/ Ceramic Capacitors
Aluminum Electrolytic Capacitors/ Ceramic Capacitors
YANGZHOU POSITIONING TECH CO., LTD , https://www.yzpstcc.com