LED lighting power drive IC costs are expected to drop sharply

Entering the middle of 2013, reviewing the market trend of LED lighting in the first half of the year, whether it is LED bulbs or straight lamps, the price is rapidly falling at a rate of about 20%, especially in the field of commercial lighting, LED lamps The price has taken the lead in reaching the "sweet spot", which has also stimulated the penetration of LED lamps in the commercial lighting market this year. Faced with a new round of growth opportunities in the market, LED lighting solutions are urgently required to further improve light efficiency as a whole, while increasing cost-effectiveness to adapt to the wider application of LED lighting in a wider range.
Especially in the core of LED lighting - power drive IC, although the average selling price of LED lamps has continued to decline in recent years, the cost reduction of the drive is not large, and this situation is expected to change in the near future. According to IMSResearch's survey, by 2013, driver IC still accounts for 40% of LED bulb manufacturing costs, but with the overall price of lamps and the technical improvement of various components, it is expected that the cost ratio of LED drivers will be significantly increased before 2015. Down 36%.
The reduction in the cost of driver ICs is a general trend, which requires manufacturers to develop cost-effective drives to maintain cost curves through improvements in manufacturing processes, innovation in drive solutions, and the latest developments in lamp power supply design. For example, a more obvious trend in the market is that different types of LED lamps, including candle lamps, A19 bulbs, GU10, PAR30/38 spotlights, etc., are beginning to adopt more and more non-isolated power supply topologies (especially It is used in small and medium power lighting applications). Compared with the isolated power supply design, the non-isolated topology design and board configuration are simple, the board size is small, and the energy efficiency is higher. Therefore, in terms of manufacturing cost, space, and energy efficiency (Efficiency), etc. Both have obvious advantages. At present, this product development trend has been widely recognized in the major LED lighting application markets such as Europe and the United States.
As the market places higher demands on cost, size and energy efficiency of LED lighting driver power, LED driver ICs will also move toward higher integration, integrating more components/functions (such as dimming). / Non-dimming, etc.), as much as possible to simplify the design (such as heat dissipation) and wiring costs brought by the manufacturer during peripheral development, and ultimately help to improve the cost performance of the entire drive power supply.

ONEREEL`S INJECTION MOULDED PLASTIC YARN CARRIER DYE TUBES / DYE CONES FOR YARN STEAMING & DYEING, BOBBINS, RING SPINNING TUBES & OTHER PLASTIC PARTS IN VARIOUS POLYMERS AND ALSO STAINLESS STEEL DYEING MACHINES ACCESSORIES 

ONEREEL have specialized in the production of Plastic/Polymers mold and Tool making for the Textile & associated industries for over 35 years. The development in winding technology, Yarn package formation and the Yarn Dyeing equipment have led to greater utilisation and productivity and at the same time improved the quality of the yarns and their running properties. The Dye packages and Tubes are most important for an optimum Dyeing Cycle. The main features of an optimum Dye package are : 

Conicity

Winding Technique

Package Face

Package Edges and Tubes

 

Under the trade name 'ONEREEL', marketing permeable Cylindrical Tubes and Cones for Yarn Dyeing. An important advantage of Cylindrical Packages or Cheeses is that the liquor flow is effected symmetrically towards the center line of the package. Above all, the liquor flow is more favorable when dye tubes with a large diameter are used. The tubes from 'ONEREEL' permit the same uniform flow throughout the package. Moreover, a better utilization of the volume is achieved than with cones replacing conventional cones with cheeses, guarantees an optimal levelness of Dyeing and offers significant advantages from an economic point of view.

 

'ONEREEL' ADVANCE PRODUCTS TO REDUCE COSTS.

'ONEREEL' product range having variety of items intended for every stage of yarn production, preparation for Spinning (Ring, Open-end, Self acting), Twisting, Winding and Package Dyeing.

'ONEREEL' product range has been improved since few years with highly innovative and patented Yarn carriers in order to satisfy the necessities of the Package Dye sector especially which is under high development. The Policy of all new systems is the research to match the best Dyeing result with the easiest method to use yarn carriers; means to reach the following results that only the right Yarn Carrier can guarantee.

Saving time while loading on the Dye vats.

Automated loading simplification.

Yarn compression production increases.

Complete reliability & quality of yarn carrier in all production stages.

 

THE 'ONEREEL' MOULDED PLASTIC PRODUCT RANGE FOR TEXTILE INDUSTRIES INCLUDES

SPEED FRAME TUBES / RING SPINNING TUBES / YARN CARRIER DYE TUBES

OE (OPEN END) TUBES / CHEESE TUBES/ SPEED FRAME TUBES

2-FOR-1 TWISTER TUBE  / FLYER BOBBINS

CYLINDRICAL WINDING TUBES

ONEWAY & REUSABLE UNIVERSAL PERFORATED TUBES

ONEWAY PRESS PERFORATED DYE TUBES
(For Winding Machine and Double Twister)

CYLINDRICAL PERFORATED DYE TUBES
(For Winding & Open-end Machines)

CONICAL PLAIN WINDING TUBES 4º 20`

CONICAL PERFORATED DYEING TUBES  4º 20`

CONICAL PERFORATED WINDING & DYEING TUBES  5º 57`
(One Way & Multi way)

CONICAL & CYLINDRICAL  PERFORATED SULZER TUBES
 (Preferably for weft feeding at gripper and Air Jet Weaving Machine)

SEPARATORS AT RING SPINNING AND TWISTING FRAMES.

DYE PRECISELY WITH 'ONEREEL' PP (PLASTIC) DYE TUBES, CONES & BOBBINS

DYE TUBES & CONES

DYEING MACHINE ACCESSORIES

PLASTIC PERFORATED DYE TUBES & CONES

PERFORATED CONES & CYLINDERICAL TUBES

PERFORATED TUBES, WINDING CONES, CHEESE TUBES

TEXTILE YARN & FIBER DYEING ACCESSORIES

YARN PACKAGE DYEING – DYE  TUBES – DYE CONES

PLASTIC TUBES FOR WINDING YARNS

YARN CARRIERS

PLASTIC PARTS, CONES, DYE TUBES

CONES & CHEESES, RIBBON BOBBINES ON FLANGE DYE TUBES OF METAL & PLASTIC DYE TUBES

PLASTIC PERFORATED DYE TUBE SUITABLE FOR FONG`S, THEN & OTHER YARN DYEING PLANTS

AND ALSO-..YOUR `SINGLE SOURCE` SOLUTION OF DYEING ACCESSORIES FOR OUR FULLY DEVELOPMENT PRODUCT SUITABLE FOR

YARN & FIBRE DYEING MACHINES

HTHP BEAM DYEING MACHINES

 JET DYEING MACHINES

 

LIKE

Triangular Dye Spindle

Perforated Tubes

Locking Caps with Bolts/Plates

Spacers for Dye Cones

Head / Base Plates

Dye Cones / Tubes

Complete Carrier with Spindle

Main Circulating & Injection, Booster Pump & Spares

Mechanical Shaft Seals of all types & sizes.

Rubber Door Sealing Gaskets & other Rubber parts

 

SPARE PARTS & ACCESSORIES SUITABLE FOR ........

Yarn & Fiber  Dyeing Plants

HTHP Beam Dyeing Plants

HTHP Jet Back Dyeing Plants

Normal Temp. Jet Dyeing Plants

HTHP Duper High Speed Jet Dyeing Plant

Soft Flow Roto Stream Jet Dyeing Plants

 

'ONEREEL' PLASTIC DYE TUBES & CONES ARE THE ULTIMATE IN PLASTIC DYE TUBES & CONES FOR HIGH PERFORMANCE YARN STEAMING & DYEING.

 Yarn Bobbin

Yarn Bobbin

Yarn Bobbin,Dyeing Bobbin,Roving Bobbin,Ring Bobbin,Cylindrical Bobbin,Cone Bobbin

NINGBO BEILUN TIAOYUE MACHINE CO., LTD. , https://www.spool-manufacturer.com

Posted on