Lingyun Q3 installs TV broadcast software via computer

Lingyun Q3 installed sofa butlers through the computer, Lingyun box other models can also refer to this tutorial.

Installation process 1 box and computer with the same router connection → 2 open the box record IP address information → 3 download sofa TV wizard → 4 sofa TV Elf dialog box input TV IP → 5 to complete the installation

Steps
1. Open ADB remote debugging of the box: System Settings - General Settings - System Information - Copyright Notice





2. Remote control direction keys: Left, right, left, or right, enter the project mode, turn on the debug mode, and record the IP address


3. On the computer: Click to download the sofa TV wizard

Note: Windows XP system must first install net.3.5, NET.3.5 download address: Download Now

Unzip the downloaded TV sofa elf on your computer and open the unzipped file "Sofa TV Elf"

When you double-click on the sofa to run the TV wizard, if there is a risk on the computer with anti-virus software, please exit or allow installation.

Win8 system running sofa TV wizard will pop up confirmation

Click on "Need to run"

determine

4. At this time, enter the IP address of the box in the popup screen


Wait a moment


Tips:
1. If the computer shows that installing the sofa butler has been successful, but the box is not found, then you have to break the box's network in the connection network, then enter the IP on the sofa elf. About 3-4 times will be able to install up (because of different equipment, transmission signal strength is divided)
2. If the installation fails, check whether the network used by the box and the computer is the same network. If not, change to the same network before proceeding.

If the installation fails, restart the device and try again by following the steps (may be useful). Still have questions please add the official QQ group below.

Watch on-demand video on smart TV, recommend using pudding video; Watch live TV, recommend HDP live broadcast; More interesting content, please use Tencent video TV version, TV; Fun smart TV and box, more exciting content in Sofa net.

According to the classification of the shape, Telephone Cable have Round Telephone Cable and Flat Telephone Cable.
The common specification of flat telephone cable has two core and four core, the wire diameter has 0.4 and 0.5 respectively, some areas have 0.8 and 1.0.In addition to the two and four cores, there are four, six, eight, and ten cores.
If the general family is the local telephone use mode, 2 chip is enough to use.If the telephone is used by a company or part of a group, it is recommended to use a 4-cell line in consideration of the need for telephone broadband, and a 6-cell line is recommended if a digital telephone is used.

Flat Telephone Cable

Flat Telephone Cable,Flat Phone Cable,Telephone Flat Cable,Field Telephone Cable

Shenzhen Kingwire Electronics Co., Ltd. , https://www.kingwires.com

Posted on