Sony Sony ZX1 makes your line change no longer futile: simple use of headphones upgrade line contrast

Recently began tossing the upgrade line of headphones, began to contact this is also starting from the big headphones, buy X2 can change the line, when I wanted to change the line is also the sound quality of X2 want to improve some of the sound, but Shaoyou is because of what Change the upgrade line? Personally summed up the following major needs:

1. The headphone cable is too long

First of all, many headsets have this kind of situation, because the positioning of large headsets is generally a desktop push, and if the cable is very short, then it is not convenient to use on the desktop. Instead, the long cable is on the desktop. It's better to play, but there are many fans who buy some big ears that are easy to push. In many cases, they are pushed straight and do not need to go to the machine. So this kind of long wire is natural to them and they want to change it. Shorter wire materials may not be very important for sound quality requirements.


2. Not satisfied with the sound quality of headphones

Buying headphones finds that your favorite songs don't perform well, so you will upgrade the line to upgrade a certain band. This will not only improve the sound quality of your headphones, but also save you headphones and then toss other things. This process of headphones.

The Philips X2 under the official promotion line with Sony ZX1 - easy to push, vocals are more close to the ear, not too fine workmanship

Starting from my own situation, I started the X2 official line because of the first reason. The original line of X2 is too long. I usually use a computer to push or push the player. The wire is too long. Last month was The aircraft sent the points for an official line. The length of the line was found to be very suitable. It was only 1.2 meters. The sound quality was not heard from the computer. There was a slight difference between the Sony ZX1 and the low frequency. As a result, the vocals became closer, and then the sounds felt a bit larger, indicating that the impedance of the official ascending line was small, it was easy to push, and the vocals were instantly attached to the ear. This also shows that the front end has a lot of changes in the upgrade line. Great influence.

Philips X2 under the Sony MUC-S30UM1 line with the Sony ZX1 - full of momentum, venom and poison, not suitable for carrying

Sometimes it is incomprehensible to burn the world, just like myself, with a long wire, a short one, and then a wire with a length of 3 meters. The premise is also because of this wire. Recently doing activities, read a few articles on the Internet, said that this wire can make X2 resolution better, and see the root of the upgrade line is 6.5, generally prepared for the desktop, naturally Feeling very high, the price of the activity entered.

Sony MUC-S30UM1 material is silver plated OFC, the material above will be a layer of silver than the original line, and this coated wire will directly affect its three-frequency transmission in the sound, so in terms of hearing, Sony The upgrade line makes X2's tri-band more balanced, probably means that the original X2 vocals are somewhat concave, and the roots of this upgrade line are close to some, so the tri-band is more balanced, because the front end of the resolving power The thrust is limited, and for the time being it hasn't caught much difference. In the sound field, it is more horizontal, more generous, and texture.

to sum up:

Because only two upgrade lines have been used, picking techniques and the like can't be said, but we can give you some small suggestions. If you don't like the sound of headphones, you may wish to use some upgrade lines to improve his sound quality. Of course, The more expensive upgrade line, the greater the improvement of sound quality in terms of reason, because the materials and materials should be better. The existing Sony upgrade line on hand is larger than the promotion line.

For different material wires, the difference between single crystal copper and silver plating is known for the time being. These two kinds of wires are also common. The higher the purity of copper, the better the conductivity, the lower the transmission loss, and the signal distortion. The smaller it is, the better the sound quality is, and the silver is generally used as the surface layer of the wire material, such as silver plating. The silver wire has high frequency characteristics, the sound is bright and transparent, and the density is high. The sound lines are prominent. Better.

Home Speakers

Home Theater Speakers ,Home Speakers , 2.1 channel Speakers , 4.1 channel Speakers,5.1 channel Speakers

Newmax Electronics Co.,LTD , https://www.fspeaker.com

Posted on