TDA1517ATW is NXP's 8W BTL or 2 × 4 W SE audio power amplifier. It integrates a class AB output amplifier in the HTSSOP20 package. It can be used as a mono bridged load (BTL) or stereo single-ended (SE) connection. Ripple suppression and AC and DC short circuit safety. This article introduces the main features of TDA1517ATW, the block diagram and the application block diagram of BTL and SE connection.
TDA1517ATW: 8 W BTL or 2 × 4 W SE power amplifier
The TDA1517ATW is an integrated class-AB output amplifier contained in a plasTIc heatsink thin shrink small outline package (HTSSOP20). The device is primarily developed for mulTImedia applicaTIons.
TDA1517ATW main features:
• Requires very few external components
• Flexibility in use: mono Bridge-TIed Load (BTL) and stereo Single-Ended (SE); it should be noted that in stereo applications the outputs of both amplifiers are in opposite phase
• High output power
• Low offset voltage at output (important for BTL)
• Fixed gain
• Good ripple rejection
• Mode select switch (operating, mute and standby)
• AC and DC short-circuit safe to ground and VP
• Electrostatic discharge protection
• Thermal protection
• Reverse polarity safe
• Capable of handling high energy on outputs (VP ​​= 0 V)
• No switch-on / switch-off plop
• Low thermal resistance.
figure 1. TDA1517ATW block diagram
figure 2. TDA1517ATW BTL application block diagram
image 3. TDA1517ATW SE application block diagram
TDA1517ATW: 8 W BTL or 2 × 4 W SE power amplifier
The TDA1517ATW is an integrated class-AB output amplifier contained in a plasTIc heatsink thin shrink small outline package (HTSSOP20). The device is primarily developed for mulTImedia applicaTIons.
TDA1517ATW main features:
• Requires very few external components
• Flexibility in use: mono Bridge-TIed Load (BTL) and stereo Single-Ended (SE); it should be noted that in stereo applications the outputs of both amplifiers are in opposite phase
• High output power
• Low offset voltage at output (important for BTL)
• Fixed gain
• Good ripple rejection
• Mode select switch (operating, mute and standby)
• AC and DC short-circuit safe to ground and VP
• Electrostatic discharge protection
• Thermal protection
• Reverse polarity safe
• Capable of handling high energy on outputs (VP ​​= 0 V)
• No switch-on / switch-off plop
• Low thermal resistance.
figure 1. TDA1517ATW block diagram
figure 2. TDA1517ATW BTL application block diagram
image 3. TDA1517ATW SE application block diagram
40152 15Ah 3.2V Lithium Ion Battery
Lithium Polymer,Lithium Battery Types,Lithium Ion Car Battery,Hw40152S 15Ah Lifepo4 Battery
Zhejiang Xinghai Energy Technology Co.,Ltd , https://www.headwayli-battery.com