The following is the TU100, which has a good personality, and a very personal ITX chassis. It was not long before it was proposed to expand, expand, and expand capacity. I don't know why it was necessary to come up with a small desktop chassis. Now that the hard disk is not enough, is it...
LIANLI Black Mini-ITX Chassis (Hand-Held Design/All-Aluminum Case/SFX Power/Dual USB 3.0 Interface) PC-TU100B849 Yuan Jingdong Direct Link This is the internal structure of the TU100. The space is relatively narrow and the stuff is full. It can only be dismantled.
On the back of the chassis, there is still some trace space.
At that time, in order to add HDD HDDs, they could only be installed in the optical drive. Due to the limited space, the fixed position was slightly deformed.
The internal parts are removed and the table is full. The overall layout of this small chassis is still good.
The main body of the last remaining chassis
The EVGA GTX 750Ti did not require additional power at the time.
Comes with a good backboard
ASUS H170I Motherboard
Yinxin ST45SF, SFX full mode gold power supply, in addition to full load noise is a bit big, others are good. Due to the need to replace the large chassis, it seems that the power supply needs to be replaced.
Magnesia classic yellow DDR3
Originally installed a SSD TR100 (125G) + Western Digital 1.5T black disk
Now we have to add two HDDs. This way, four HDDs can be used. The original chassis cannot be used anymore. It can only be changed.
All the accessories and things are still relatively large, requiring a relatively large chassis. The key is to install three HDDs at the same time.
In search of the best match, the price is also more suitable for the chaser 215.
Herd (PHANTEKS) 215PC black steel panel mini ITX water-cooled computer chassis (support 280 water-cooled / SSD back line / long graphics / dust-proof with 20CM silent fan) 399 yuan Jingdong direct link Jingdong's own fast delivery is a big advantage. The packaging is still very powerful.
There are also environmentally friendly packaging
Disassembled part of the show
No measurement, the appearance of more tough.
Pre-IO
The back of the materials will be saved
Compared with the general ITX chassis, the internal space is still relatively large.
The bezel on the upper part of the graphics card can be installed with an HDD or SSD. It is found that installing the SSD is more convenient, but the HDD needs accessories when installed, and the chassis itself does not need to be purchased separately.
Power independent positions, this design helps to heat it
The back line space is still good
There are two HDD installations underneath
Pre-IO lines affect the trace
Power supply position comparison is small
Remove the front panel
Removable air filter
Front super large 20cm air intake can effectively improve wind noise
Upper removable fan mounting position
Can be completely removed for easy installation of fans
Motherboard machine
Segotep rated 500W GP600P Platinum Edition power supply (Platinum certification / wide input / DC-DC low voltage circuit / intelligent temperature control fan) 319 yuan Jingdong direct link The power supply looked for the relatively cheap Xingu GP 600P, although it was not full-scale, but it was also platinum.
This pile of pressure is still relatively large
Reluctant to walk the line, do not know if this can still see?
The front can only be this way, found a problem before the HDD can not be installed properly
Search found a dedicated 3.5 hard drive mounting bracket, the price is very unfriendly.
Just such a small piece
Hard disk effect
This will fix the HDD
The side boards are all good, this, this, this, in the end do you have something?
Fortunately, from the perspective of chrysanthemum, there are still goods
A stream, not a new thing will not be tested
1, the chassis space, can accommodate more hardware, but gives people the feeling is not normal ITX chassis size;
2, the price is more affordable, but the materials need to be strengthened;
3, Yan value depends on personal preferences, and I feel very nice to see.
A manual pulse generator (MPG) is a device normally associated with computer numerically controlled machinery or other devices involved in positioning. It usually consists of a rotating knob that generates electrical pulses that are sent to an equipment controller. The controller will then move the piece of equipment a predetermined distance for each pulse.
The CNC handheld controller MPG Pendant with x1, x10, x100 selectable. It is equipped with our popular machined MPG unit, 4,5,6 axis and scale selector, emergency stop and reset button.
Manual Pulse Generator,Handwheel MPG CNC,Electric Pulse Generator,Signal Pulse Generator
Jilin Lander Intelligent Technology Co., Ltd , https://www.jilinlandertech.com