Theme: Industry
Taiwan CCFL manufacturers Power Alliance (3080) and Chengchuang (3536) have successively adjusted CCFL production lines. In addition to actively changing LED backlight products, they also carry out mass production and packaging of LED light strips, and will continue to enter energy-saving lamps in the future. Lighting market, LED lighting market, not just the current LED backlight market.
Power Alliance estimates that by the end of 2010, the company's LED packaging capacity will be expanded to 200 million a month.
As for Chengchuang, the company has changed a CCFL production line to CCFL energy-saving bulbs and energy-saving lamps in 2009, and will complete the internal LED packaging production line in Q2 in 2010 and cut into LED lighting applications. At this stage, there is no plan to enter the LED backlight market.
Peel Mask PCB
Peel able masks are used in order to protect selected solder holes against plugging during mass soldering or to protect carbon elements and gold plated contacts during mass soldering. Peel able masks are screen printed.
Requirements
• The peelable mask must adhere sufficiently well to the PCB so that it does not peel off when handled correctly.
• It must be able to endure a two to three time soldering process without peeling off, but must remain detachable.
•After soldering of the PCB, the peelable mask must be able to be detached – preferably in one piece. In case of metallized holes, no mask
residue must be left in the drill holes or on the surface of the PCB. In the case of non-metallized drill holes, however a certain amount of residue
can remain.
• The peelable mask must be able to resist conventional solvents such as chlorinated and fluorinated hydrocarbons, isopropanol, conventional
fluxes and similar.
• Particular requirements: The roughness U of the edge of the mask can be 0,5 mm from the tip to the base (left figure
below).
Peel Mask Board,Green Peel Mask Board,Quick Turn Peel Mask Board,Mask Board
Storm Circuit Technology Ltd , http://www.stormpcb.com