Smart product sensor interface module wiring method

The sensor interface module provides 8-way interface and can connect 8 sensor signals, each of which can be independently addressed (addressing information includes the installation address and sensor type. Note: The interface must be addressed for normal use; for unused interfaces, Please clear the address of the interface of the way, and can choose "normally open"/"normally closed" according to the actual contact. Multiple sensor interface modules can be installed in the system and the management software will automatically identify them.

Third-party sensor (or dry contact) interface definition

If it is necessary to use a cadaver to access a third-party sensor or dry contact, please order it in advance. Order a multi-function panel, smart switch, or sensor interface module with a sensor interface. In addition, multi-function probe repeaters can also access third-party sensors or dry contacts. The sensor interface of the multi-function panel and smart switch uses the 6P4C (RJ11) interface.

The crystal head pins are defined as follows.

1 pin 1: power supply.

2 pin 2: Power supply +12V.

3 Pin 3: For the sensor interface of the multi-function panel, this end can be connected to any type of sensor or dry contact signal; for the sensor interface of the smart switch, the end is connected to the human body movement sensor or door and window (ie, curtain, door magnet) Sensors, or other non-security sensors.

4 Pin 4: For the sensor interface of the multi-function panel, this end can be connected to any type of sensor or dry contact signal; for the sensor switch interface of the smart switch, it is connected to the gas sensor or smoke sensor, or other non-security sensors.

Security sensor

Gas smoke sensor wiring

The gas/flue gas sensor can be installed in a place where the kitchen is prone to gas leaks or fires for reliable detection.

Carefully consult the specification of the sensor. If the sensor's operating current is greater than 60mA, an external power supply or a self-powered sensor is required.

Magnetic sensor wiring

The door sensor is suitable for installation on doors and windows, used to detect whether the doors and windows are closed.

Curtain sensor wiring

Curtain sensor Infrared sensor for door, window and balcony protection for anti-theft monitoring.

Human body movement sensor wiring

If the user chooses a third-party human body movement sensor for anti-theft monitoring.

Other security sensor wiring

The user can also connect the trigger signals of other sensors (such as temperature, humidity, pressure, flow, liquid level, brightness, loudness, voltage, current, doorbell sensors, etc.) produced by third-party manufacturers to the multi-function panel, intelligent switch or sensor interface. Module sensor interface, but need to set the corresponding type of access sensor in the [multi-function panel interface and parameter setting], [intelligent switch, socket parameter setting], [sensor interface module setting] interface of the computer management software. The user can set the signals of other sensors as the event trigger signal source of the logic module, thereby triggering the set event actions, thereby achieving the purpose of automatic control. If the temperature sensor sends a signal that the temperature is too high, the air conditioner in a room is automatically turned on by the logic module setting. Conversely, if the temperature sensor sends a signal with a low temperature, the air conditioner is turned off automatically.