The development of quad-core tablet products may have become a trend. Since last week, Sony revealed the results of running sub-tests for the company's quad-core tablet V150, another Japanese electronics manufacturer Fujitsu also announced its design of the quad-core tablet M532. . Fujitsu's reputation in the mobile product space is not too great, but with the rapid development of the mobile product market, the company is also seeking some changes in its own. In May this year, Fujitsu will formally launch the quad-core tablet product.
According to reports, the M532 uses a 10.1-inch display with a resolution of 1280x800. The processor uses the NVIDIA Tegra3 quad-core processor. It also has 32GB of internal storage and supports microSD expansion cards. Install and run the latest Android 4.0 ICS operating system.
The M532 has two cameras, one on the front of the camera, with 2 million pixels, and the other on the back of the camera, with 800 pixels and a flash. The body of the M532 is designed to be very thin, with a multimedia interface including a SIM card slot, expansion card slot, mini-HDMI and micro-USB in the periphery of the fuselage. Among them, the fuselage edge on the bottom of the M532 screen is also equipped with a docking connector similar to the ASUS Transformer Prime tablet, through which you can connect keyboards and other external devices.
It is reported that the M532 will be officially marketed in May. Its price is approximately 720 US dollars (about 4,500 yuan).
Fiber patch cords are used to make patch cords from the device to the fiber optic cabling link. There is a thick protective layer, which is generally used in the connection between the optical transceiver and the terminal box, and is applied in some fields such as a fiber-optic communication system, a fiber access network, an optical fiber data transmission, and a local area network.
Optical fiber jumpers (also known as fiber optic connectors) are connectors that are attached to both ends of the cable.
It is used to realize the optical path active connection; the plug at one end is called the pigtail. Optical Fiber Patch Cord/Cable is similar to Coaxial Cable except that there is no mesh shield. The center is the glass core of light transmission. In a multimode fiber, the core has a diameter of 50 μm to 65 μm, which is roughly equivalent to the thickness of a human hair. The single mode fiber core has a diameter of 8 μm to 10 μm. The outer periphery of the core is surrounded by a glass envelope having a lower index of refraction than the core to retain the fiber within the core. Next to it is a thin plastic jacket to protect the envelope.
Optical Fiber Jumper Cable,Fiber Optic Jumper Cable,Fiber Optic Jumper Cables,Control Shielded Cables
Jiangsu QiSheng Cable Co., Ltd. , https://www.shuaihe-cable.com